Showing 217–240 of 337 results
-
Firewood Processors
Rabaud XYLOG 410
With a maximum cutting diameter of 410 mm and 16 tons of splitting power, the XYLOG 410 wood processor allows straightforward adjustment of log lengths to 200, 250, 300, 330, 400, 450 or 500 mm. A 1000 mm diameter circular saw with carbide teeth is fitted as standard, and four splitting wedge configurations are available: 0/2/3, 2/4, 2/6, or 2/8. Logs are held in position by a hydraulic clamp featuring a tunnel form, which centres them correctly ahead of cutting. On the TH version, a 4 m or 4.5 m discharge conveyor is constructed with metal bars formed from several strips, keeping maintenance straightforward and cost-effective. The conveyor can be adjusted for height and folded down for transportation. The machine is PTO-driven, requiring a tractor of between 35 Hp and 100 Hp, connected via a 3-point hitch. Fitment of a petrol or electric motor and a remote control is also an option.
Hire Now -
Firewood Processors
Rabaud XYLOG 420
Compatible with a 3-point tractor linkage or available in 3-phase electric, the XYLOG 420 offers a cutting diameter of up to 420mm and straightforward length adjustment between 150mm and 500mm. Splitting power is automatically matched to the load, delivering 18 tons at low speed and 12 tons at fast speed. Hydraulic adjustment of the splitting wedge provides settings of 0/2/4/6 or 0/2/4/8. Fitted with the XYLOMETER - an automated wood scaling system - the XYLOG 420 enables precise measurement of the volume of wood produced. Wood alignment is improved via a side-shifted splitter with a V-shaped canal, and the splitting cycle can be positioned either manually or automatically. Available options encompass an extended intake and unloading conveyor, LED lights on the saw, a waste collector and sawdust vacuum, and more.
Hire Now -
Firewood Processors
Rabaud XYLOG 520
Driven by PTO, engine, or electric power, the XYLOG 520 features a carbide circular saw blade with a maximum diameter of 1300 mm, handling diameters of up to 520 mm with cutting lengths ranging from 200 mm to 500 mm. The log splitting section is adjustable from 30 to 250 mm, with 2 'V'-shaped blades delivering 22 tons of force. Designed with the operator in mind, the cab offers a comfortable seat, sound proofing, air con, heating, and a radio. A hydraulically movable output conveyor orientated by 40° is included, alongside a screening system that employs hedgehog rollers. Maintenance is straightforward thanks to remote draining and easy access to the hydraulic and electric chambers. Wi-fi connectivity enables fast and efficient technical support to be provided remotely.
Hire Now -
Firewood Processors
Rabaud XYLOG 600
Designed for large-scale professional firewood production, the XYLOG 600 offers an adjustable cutting length of 250 mm to 500 mm and a maximum cutting diameter of 600 mm. A powerful 35-ton cylinder delivers automatic speed with continuous variation ISO power. Depending on wood diameter, the hydraulic splitting cross self-positions and splits in 2, 4, 8, or 16. Separate cutting and splitting areas allow an armful of logs to be sawn and split simultaneously, whilst logs requiring no splitting can bypass the splitting area entirely for quick, efficient operation. The XYLOG 600 comes in a mobile version (PTO 540 rpm) or a stationary version (electric or motor-driven). The mobile version is equipped with a 2 m loading chain platform and a hydraulic folding, height-adjustable 4 m conveyor. The stationary version, by contrast, features a loading chain platform from 5 m alongside an 8 m swivelling discharge conveyor.
Hire Now -
Firewood Processors
Rabaud XYLOG 800
Powered by two 3-phase engines, the XYLOG 800 features a 3-chain feeding deck reaching up to 8m in length (stationary version). Correct wood positioning ahead of the cutting system is maintained by the feeding conveyor and 2 'V'-shaped bands, each 400mm wide and 4m long. Cutting length is straightforward to adjust between 250mm and 500mm, with bottom-to-top cutting for greater productivity - particularly time-saving when processing small diameter logs. A 3-meter conveyor forms the buffer zone, supporting continuous log feeding through to the splitting area, where two independent blades operate alongside three independent press devices for improved wood holding. Speed and required power across the blades are managed via the IOS power system. The chainsaw is both self-tensioning and self-lubricating.
Hire Now -
Forestry Machinery
Rabaud XYLOGRIP 180 / 180R
Designed for large diameter wood in the 700 mm to 12700 mm range, XYLOGRIP timber grabs offer versatile attachment to a forestry crane, mini-excavator, telescopic or front loader. (Minimum oil flow 40 l/min and maximum 60 l/min) With a maximum load capacity of 1.5 ton, the integrated rotator enables 360° rotation of timber (on the XYLOGRIP 180R)
Hire Now -
Forestry Machinery
Rabaud XYLOGRIP 230 / 230 R + Rotator
Compatible with a forestry crane, excavator ranging from 4.5 to 14 tons, telescopic or compact loader. (Minimum oil flow 40 l/min and maximum 60 l/min)
Hire Now -
Firewood Production
Rabaud XYLOPACK
Designed for industrial use, the XYLOPACK is a bagging machine featuring a hydraulic vibrating system that ensures accurate log positioning ahead of palleting. Rectangular jigs in various sizes accommodate different pallet dimensions, with finished pallets wrapped in either stretch, water-tight plastic film (for dry wood) or net (for green wood). A restrained roller provides adjustable tension on the reel support, giving the operator direct control over net tension, number of turns, and drum timing. Radio-controlled operation is standard, and the hydraulic unit is powered by a 3-phased electric engine (7.5 kw). A sifter, conveyor, and discharge chute are available as options.
Hire Now -
Mulching Heads
Rabaud XYLOR 1014PE 1414PE 1420PE
Suited to land clearing and brushing applications, this mulching head is compatible with excavators ranging from 8-20 ton (dependent on model). An electronically balanced helical rotor delivers greater durability, paired with fixed carbide point hammers and 2 counter hammers in a "U" shape for optimal shredding. Oil flow regulation, pressure limitation, and progressive rotor braking are all managed through the HBC system (Hydraulic Block Control). Front protection is provided by chains.
Hire Now -
Mulching Heads
Rabaud XYLOR 1300SK 1400SK 1600SK 1800SK 2000SK
Built to suit skid steer loaders rated between 50-90Hp, this mulcher features a universal coupling. A set of mobile hammers and counter hammers are arranged in a "U" shape on the helical rotor, delivering superior crushing performance with side drive by belt. The HBC system (Hydraulic Block Control) manages hydraulic flow control, limits pressure, and enables progressive braking of the rotor.
Hire Now -
Mulching Heads
Rabaud XYLOR 1800/95T 2000/110T 2200/125T
Designed for rural areas and forest clearing, this mulcher fits the front or rear 3 point linkage of a tractor ranging from 80 to 125Hp (model dependent). A multiplier casing with dual output and double free wheel is included, along with a helical rotor featuring mobile hammers and 2 counter hammer lines. A hydraulic rear trap with a cylinder handles waste release, while a double row of front chains and anti-spatter rubber bands are also fitted. Skids with special geometry allow operation across any type of ground. The self-lubricating articulation requires no grease points to maintain.
Hire Now -
Mulching Heads
Rabaud XYLOR 2000/120T 2200/175T 2200/250T 2200/300T
Suited to a wide range of applications, this mulcher is compatible with tractors from 80-300Hp and features a helical rotor, fixed hammers with tungsten carbide bits. Depending on the model, it is equipped with 2 or 3 counter knives and also incorporates a hermetic closure on the rotor. The rear trap is hydraulic, the anti-wear skids are adjustable, and both the front and rear are protected by chains. Constructed from hard steel, the frame delivers high resistance and long lasting wear.
Hire Now -
Mulching Heads
Rabaud XYLOR 603PE 803PE 1005PE 1207PE 1209PE 1413PE
Built for undergrowth clearance, the XYLOR suits excavators ranging from 2 to 13 ton depending on the model. The HBC system (Hydraulic Block Control) manages hydraulic oil flow control, pressure limitation and progressive braking of the rotor, which is electronically balanced to real rotation speed. Featuring a helicoidal rotor with hammers and one line of u-shape counter knives for optimal clearing, the XYLOR (excluding the 603 and 803) also includes a rear depth control that is height adjustable in 3 positions. A protective housing covers the hydraulic block and belts, with rear protection provided by an adjustable anti-spatter guard and front protection via chains. Protective covers are fitted to the hydraulic hoses as well.
Hire Now -
Firewood Production
Rabaud XYLOSCIE 600 EM / ET & 700 ET PRO 2
Three models make up the XYLOSCIE range. The XYLOSCIE 600 (available in single or 3-phase) handles diameters up to 200mm, while the XYLOSCIE 700 (available in 3-phase) handles diameters up to 260mm. Alternate positioned teeth with left/right angling on the carbide steel blade reduce the power required and produce a clean cut. A swivel log holder minimises wood jamming on the blade, keeping the machine safe and efficient. A casing fully encloses the blade, with a mobile cover over the cutting area for user safety. The electric brake brings the blade to a stop in under 10 seconds. An adjustable dead stop allows the cutting length to be controlled.
Hire Now -
Firewood Production
Rabaud XYLOSCIE 600M
Powered by a Kohler engine backed by a 3 year warranty, this petrol saw bench cuts wood up to 200 mm in diameter and moves easily between locations thanks to a handle and 2 inflatable wheels. Alternated serrated teeth on the 600mm blade deliver a clean cut whilst reducing power consumption. The log rack is straightforward to use, featuring a log clamp and handle, with cutting length adjusted via the sliding caliper.
Hire Now -
Firewood Production
Rabaud XYLOSCIE 600T / 700T SR / 700T PRO
Suitable for tractors ranging from a minimum of 10 Hp (max 50 Hp) for the XYLOSCIE 600T and 25 Hp (max 75 Hp) for the 700T, the XYLOSCIE T offers a cutting diameter of 200 mm (600 T model) to 260 mm (700 T models). Teeth in alternating positions on the carbide blade deliver a cleaner, quicker cut whilst drawing less power. Blade stoppage takes under 10 seconds thanks to the electro-magnetic clutch (except the 700 T PRO). The log holder is safe and ergonomic, featuring a holding clamp and handle, and a casing fully encloses the blade with a moveable cover over the cutting area. Cutting length is managed by an adjustable dead stop.
Hire Now -
Firewood Production
Rabaud XYLOSCIE 700M /700M PRO
Petrol driven and ROAD LEGAL, this saw bench is powered by a Kohler engine carrying a 3 year warranty, with versions available featuring 1.3 & 4.8 metre conveyors. Alternated serrated teeth on the 700 mm diameter blade deliver a clean cut whilst drawing less power. A fixed casing covers the blade entirely, with a mobile casing over the cutting area. The log rack is user friendly, incorporating a log clamp and handle, and cutting length is controlled via the adjustable stop.
Hire Now -
Forestry Machinery
Rabaud XYLOTRAIL 11 – Single Beam
Road approved for timber haulage, the XYLOTRAIL 11 has a total weight capacity of 11 tons. Its walking beam axle is bolted and adjustable, ensuring improved distribution of the load. Hydraulic brakes are fitted to all wheels for greater protection across challenging terrain. For additional safety, both the wiring harness and parking brake are housed within the main beam. A robust steel protection grid assists with the correct and secure positioning of logs on the trailer, while the built-in lighting signs require no manual operation. Improved visibility over the load is provided by the elevated footbridge designed for the crane operator. (Forestry crane an option.)
Hire Now -
Forestry Machinery
Rabaud XYLOTRAIL 15 and 18 – Double Beam
The XYLOTRAIL 15 and 18 are road-approved timber trailers available in 15 or 18 ton overall weights. Bolted balance axles deliver substantial articulation, and hydraulic braking operates across all four wheels. A thick steel protective grid aids safe log loading and storage, while a dedicated walkway gives the crane operator a clear view of the loading process. (Forestry crane in option.) All hydraulic hoses, electrical wiring and the parking brake are housed within the beam alongside embedded lights, offering reliable protection in hard-to-access fields.
Hire Now -
MDB
Rear Post Mower ⌀500
Hire Now -
Skid Steer Hire
Tracked Skid-Steer
A tracked skid-steer for work on soft, uneven or sensitive ground where a wheeled machine would struggle for traction. Tracks spread the load and reduce surface damage, and the higher lift and tipping load suit heavier material handling. Takes the same attachment range as the wheeled model.
Hire Now -
Skid Steer Hire
Wheeled Skid-Steer
A compact wheeled skid-steer for confined site work where a conventional loader will not fit. The 360 degree turn on the spot makes it suited to yards, narrow access and tight commercial sites. Under 1.6m wide excluding attachments, and available with buckets, forks, augers, planers and sweepers.
Hire Now -
Firewood Processors
XYLOFLAM 330/450+
Capable of producing Kindling or Logs, the XYLOFLAM 330/450+ handles all wood types. Three wood lengths are accepted: 200, 250, or 330mm, with a maximum diameter of 450mm. The crossed splitter delivers 16 tons of force, and the kindling/log section adjusts between 20mm and 150mm. Power Sources: 3-Phase Electric and Petrol engine. *PTO version available via special request OptionsDischarge spouts suited to piled-up bagging come in 20 or 40-litre versions. Time meter for the electric version
Hire Now -
Site Welfare & Waste
4 Yard Skip
Our smallest skip, this size is ideal for garden clearances and smaller waste removal services.
Hire Now
